TY - ABST
T1 - BE-SALT
T2 - IDRA Reykjavik Summit on Water and Climate Change
AU - Villacorte, Loreen Ople
AU - Ekowati, Yuli
AU - Søborg, Ditte Andreasen
AU - Ramsay, Loren Mark
AU - Højris, Bo
AU - Quintanilla, Victor Yangali
AU - Tang, Lone
AU - Skovhus, Torben Lund
PY - 2025/10/12
Y1 - 2025/10/12
N2 - Reverse osmosis (RO) desalination is currently the leading technology to address water and climate challenges in industrial and the municipal sectors. It can remove most water contaminants and is therefore widely used in treating contaminated but abundant water resources such as surface water, seawater, and secondary treated wastewater. However, there are some downsides of applying RO, including high energy consumption and production of brine wastewater which can be harmful to the aquatic environment. Brine discharge can be particularly problematic for inland brackish water RO plants where the aquatic environment is sensitive to salinity changes. Brackish water RO (BWRO) systems treating contaminated water sources typically discharge at least 25% of the water they treat as waste brine. Reducing such brine flow by increasing water recovery is possible but largely limited by membrane scaling and biofouling issues, which often results in unwanted downtime and costly/harmful chemical cleanings. Today, there are >10,000 inland BWRO plants globally discharging >14 million m3 of waste brine per day (Jones et al., 2019), a substantial water and environmental footprint.
Increasing the water recovery (or water efficiency) of a BWRO from 75% to 90% will decrease brine discharge by 60% and feed water consumption by 15%. Such reductions can be attained by designing and operating the RO plant in batch or semi-batch configuration instead of the standard continuous configuration. Both batch and semi-batch RO require operating the RO in short cycles of filtration with full concentrate recycling and flushing/purging/draining, whereby the salinity of the feed stream is concentrated within the filtration cycle. The short periods of variable salinity and flushing can potentially minimize the development of scaling and biological fouling. It can also reduce the specific energy consumption by up to 50% at high water recovery operation, thereby allowing the RO unit to substantially reduce water consumption without increasing its carbon footprint (Warsinger et al., 2016).
BE-SALT is a Danish-funded university-industry innovation project with the aim to understand and to exploit the potential of batch RO operation in improving operational efficiency of RO desalination, with special focus on water reuse application (IFD, 2023). The main hypothesis is that salinity fluctuations during batch RO operation can be precisely controlled and optimized to minimize scaling and biofouling in RO membranes during high water recovery operations. Lab-scale testing identified the range and frequency of fluctuating osmotic stress which can inhibit growth of bacterial biofilms from freshwater and marine environments. The critical time range for batch cycling to avoid scaling were also identified for different water sources (e.g., river water, wastewater, fjord water) based on induction time measurements. Induction times measured for these sources were in the range of 1 to 6 mins at 90% recovery and 2 to 350 mins at 80% recovery. Bench-scale batch RO units were built and being tested to further identify optimal operating regimes and critical parameters to control biofouling and scaling. To demonstrate performance in practical environment, a containerized pilot batch RO unit (1-2 m3/h production capacity) is currently being implemented with auto-adaptive sensor-based control algorithms and energy recovery device. The pilot unit will be installed and tested in the field to treat effluent from a municipal wastewater treatment facility in Horsens, Denmark. The latest findings of the project, including results from bench-scale and pilot testing, will be presented during the summit.
Keywords: high recovery reverse osmosis; brine reduction; water desalination; fouling/scaling control; water footprint reduction.
References
Jones E., Qadir M., van Vliet M.T.H., Smakhtin V., Kang S. 2019 The state of desalination and brine production: A global outlook, Science of The Total Environment 657, 1343-1356.
Warsinger D.M., Tow E.W., Nayar K.G., Maswadeh L.A., Lienhard V.J.H. 2016 Energy efficiency of batch and semi-batch (CCRO) reverse osmosis desalination, Water Research 106, 272-282.
Innovation Fund Denmark (2023). Dansk finansieret forskning skal forbedre adgangen til rent drikkevand i verden. 25 April 2023, Webpage link: Dansk finansieret forskning skal forbedre adgangen til rent drikkevand i verden | Innovationsfonden.
AB - Reverse osmosis (RO) desalination is currently the leading technology to address water and climate challenges in industrial and the municipal sectors. It can remove most water contaminants and is therefore widely used in treating contaminated but abundant water resources such as surface water, seawater, and secondary treated wastewater. However, there are some downsides of applying RO, including high energy consumption and production of brine wastewater which can be harmful to the aquatic environment. Brine discharge can be particularly problematic for inland brackish water RO plants where the aquatic environment is sensitive to salinity changes. Brackish water RO (BWRO) systems treating contaminated water sources typically discharge at least 25% of the water they treat as waste brine. Reducing such brine flow by increasing water recovery is possible but largely limited by membrane scaling and biofouling issues, which often results in unwanted downtime and costly/harmful chemical cleanings. Today, there are >10,000 inland BWRO plants globally discharging >14 million m3 of waste brine per day (Jones et al., 2019), a substantial water and environmental footprint.
Increasing the water recovery (or water efficiency) of a BWRO from 75% to 90% will decrease brine discharge by 60% and feed water consumption by 15%. Such reductions can be attained by designing and operating the RO plant in batch or semi-batch configuration instead of the standard continuous configuration. Both batch and semi-batch RO require operating the RO in short cycles of filtration with full concentrate recycling and flushing/purging/draining, whereby the salinity of the feed stream is concentrated within the filtration cycle. The short periods of variable salinity and flushing can potentially minimize the development of scaling and biological fouling. It can also reduce the specific energy consumption by up to 50% at high water recovery operation, thereby allowing the RO unit to substantially reduce water consumption without increasing its carbon footprint (Warsinger et al., 2016).
BE-SALT is a Danish-funded university-industry innovation project with the aim to understand and to exploit the potential of batch RO operation in improving operational efficiency of RO desalination, with special focus on water reuse application (IFD, 2023). The main hypothesis is that salinity fluctuations during batch RO operation can be precisely controlled and optimized to minimize scaling and biofouling in RO membranes during high water recovery operations. Lab-scale testing identified the range and frequency of fluctuating osmotic stress which can inhibit growth of bacterial biofilms from freshwater and marine environments. The critical time range for batch cycling to avoid scaling were also identified for different water sources (e.g., river water, wastewater, fjord water) based on induction time measurements. Induction times measured for these sources were in the range of 1 to 6 mins at 90% recovery and 2 to 350 mins at 80% recovery. Bench-scale batch RO units were built and being tested to further identify optimal operating regimes and critical parameters to control biofouling and scaling. To demonstrate performance in practical environment, a containerized pilot batch RO unit (1-2 m3/h production capacity) is currently being implemented with auto-adaptive sensor-based control algorithms and energy recovery device. The pilot unit will be installed and tested in the field to treat effluent from a municipal wastewater treatment facility in Horsens, Denmark. The latest findings of the project, including results from bench-scale and pilot testing, will be presented during the summit.
Keywords: high recovery reverse osmosis; brine reduction; water desalination; fouling/scaling control; water footprint reduction.
References
Jones E., Qadir M., van Vliet M.T.H., Smakhtin V., Kang S. 2019 The state of desalination and brine production: A global outlook, Science of The Total Environment 657, 1343-1356.
Warsinger D.M., Tow E.W., Nayar K.G., Maswadeh L.A., Lienhard V.J.H. 2016 Energy efficiency of batch and semi-batch (CCRO) reverse osmosis desalination, Water Research 106, 272-282.
Innovation Fund Denmark (2023). Dansk finansieret forskning skal forbedre adgangen til rent drikkevand i verden. 25 April 2023, Webpage link: Dansk finansieret forskning skal forbedre adgangen til rent drikkevand i verden | Innovationsfonden.
KW - construction, environment and energy
KW - Membranfiltrering
KW - Vandbehandling
KW - Vandkvalitet
KW - Vandteknologi
UR - https://waterandclimatechange.org/
M3 - Abstract
Y2 - 12 October 2025 through 14 October 2025
ER -